DDSCV1.1 3 and 4 axis offline motion controller

[m_c]

I believe that the author of the Probe It is porting it to UCCNC.

Not much use to me though, as my probing machine runs a KFlop+KStep with linear scales to close the loop, to get as much accuracy as possible. :-/
.
Ger, do you happen to know the Macro/program refresh rate for the UCNC software?
I know Mach3 is 10Hz, Mach 4 is fair bit quicker but depends on system load, and KFlop depends entirely on how you program it but can potentially be 90uS.