DDSCV1.1 3 and 4 axis offline motion controller

[Boyan Silyavski]

For the ones without the link http://madmodder.net/index.php/topic,11598.200.html

You are doing great job there guys!

So we better start thinking then what exactly and how to be made better there in the new software.

About the panel and the rubber pad insert for the keys.
We/me and Jeff/ just bought ourselves a new 3d printer / PrusaMk2/ so soon i will be able to print the rubber and the plastic if needed. So feel free to design something better Open Source :-). I will print it , no problem. Though if what you are doing guys works, this will well deserve an Aluminum panel




Now just to heat your heads a bit more:

By the way there is an manufacturer of very similar/ if not even better board by the looks of it / that only difference is it can not read continuously from USB disc and has line limit. But if needed i can contact them and ask for software. I did not bother before with them as this one seemed more refined.


More info, quotes from emails:


TC55A is conversational programming and TC55B is G code programming.

We do not have English documents about it, but the system supports English operation.

TC55A is basically big version of TC55V and TC55B is big version of TC55H.



me:

Now there is some very important thing. In manual it says:
Electronic Gearing: Numerator : 1-99999,
Denominator : 1-99999
USB: For Importing NC Programs and Boot Page Pictures
Optically Isolated I/O ports
Maximum number of Program Lines: 799
Maximum number of Programs: 99 RAM: 128M

So the question is:
-If i load 100 000 line G code on USB, will it work, reading from USB and executing G code whole program?

What does it mean Maximum number of Program Lines: 799 ????

them:
Sorry, 100 000 will not work.


The manual is old, TC55H can support 999 at max, and TC55B can do 9999