-
12-05-2017 #171
Hey Andy, nice to meet you mate. Yeh, i really do like the building process, somthing really satisfying about building one and seeing it do its thing!....Mate im way over the other side, Geelong
Last edited by BenOZ; 12-05-2017 at 08:28 AM.
-
12-05-2017 #172
Hi Benedikt,
Please update us with how things are going when you make some progress.
The main feature if possible for the router type machines will be to auto square the gantry. Which implies that A should be able to be linear like Y, the 2 long axis on router. For the moment i have connected 2 drives at the Y and works without a glitch, so that scenario is proven.
Next thing probing on X and Y , similar like Z probing, would be interesting.
For that money i dont expect much more, if one wants rigid tapping and similar, he must look at the 500-1500 controllers. I am quite happy with the price and what it is.
Thats how i have it. Push a button and all zeroes/ the DRO/. Not that the machine starts a zeroing procedure.
-
13-05-2017 #173
Yes, but how is it done? How do you wire it up? What are the connections?
-
13-05-2017 #174
-
13-05-2017 #175
Much appreciated. Thank you. When I'm done I'll post a few pictures
Last edited by BenOZ; 13-05-2017 at 07:56 AM.
-
09-07-2017 #176
-
The Following User Says Thank You to Boyan Silyavski For This Useful Post:
-
10-07-2017 #177
Last edited by BenOZ; 10-07-2017 at 10:54 AM.
-
10-07-2017 #178
-
10-07-2017 #179
Thanks Boyan,
The drivers are just generic Chinese brand set to half step.
At the moment i only have one fan at the rear blowing in... i will replace this with a bigger fan soon and would like to use some smaller ones near the drivers. This is still a work in progress.
-
07-08-2017 #180
Hi there, im currently designing my own CNC Router, i had planned to use this controller. On my longest /Axis (X Axis here in the UK) i have Dual Ballscrews and 4nm Nema23's, i see it has already been mentioned that the controller cannot provide individual homing for each screw (by utilizing the A Axis). I see there are examples of the controller providing signal to each of the drivers, im just wondering if i am likely to encounter any problems with the gantry running out of tram using this method? I plan to use the AM882 drivers.
Thanks
Alex
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller
By dudz in forum CS-Lab (CSMIO)Replies: 35Last Post: 02-01-2017, 01:27 AM -
FOR SALE: Galil Motion Controller - PCI DMC 1842 - four axes
By lateAtNight in forum Items For SaleReplies: 1Last Post: 24-06-2014, 03:41 PM -
FOR SALE: Galil 1880 8 axis PCI motion controller
By Boyan Silyavski in forum Items For SaleReplies: 1Last Post: 03-06-2014, 07:39 PM -
Advice please! JAF Motion Controller issues!
By Mark Chard in forum Machine Control SoftwareReplies: 0Last Post: 31-01-2014, 05:03 PM -
eBay: Galil DMC-1580 Motion Controller 8-Axis
By Boyan Silyavski in forum Items On eBay UKReplies: 1Last Post: 25-12-2013, 10:30 AM
Bookmarks