SEM DC Motor Issues

[JAZZCNC]

Chaz I've got 3 x MTS30U4-36 working motors with 2 working Anilam SMA7215-1 drives and one dead one I'll sell.
The dead drive I think is probably easy repair or could even just be fuseed internaly but not checked. It Was working while I was messing around with it on bench. Turned it off then wouldn't come back on. Got new AC servos so never botherd with it just thru it in box.

Encoders on motor are 1000 line single ended but I've got some new 2500 quad Differential was going to fit so I'll sell those as well.

See pics. (Ignore Controller board)

If interested got my email make me an offer.

[Chaz]

Chaz I've got 3 x MTS30U4-36 working motors with 2 working Anilam SMA7215-1 drives and one dead one I'll sell.
The dead drive I think is probably easy repair or could even just be fuseed internaly but not checked. It Was working while I was messing around with it on bench. Turned it off then wouldn't come back on. Got new AC servos so never botherd with it just thru it in box.

Encoders on motor are 1000 line single ended but I've got some new 2500 quad Differential was going to fit so I'll sell those as well.

See pics. (Ignore Controller board)

If interested got my email make me an offer.

Thanks Dean. Ill drop you an email.

Are the motors using tacho feedback at all (ie, voltage for a specific speed)? Trying to work out if I can use my current drive (Sprint 1220i).

[Chaz]

Chaz I've got 3 x MTS30U4-36 working motors with 2 working Anilam SMA7215-1 drives and one dead one I'll sell.
The dead drive I think is probably easy repair or could even just be fuseed internaly but not checked. It Was working while I was messing around with it on bench. Turned it off then wouldn't come back on. Got new AC servos so never botherd with it just thru it in box.

Encoders on motor are 1000 line single ended but I've got some new 2500 quad Differential was going to fit so I'll sell those as well.

See pics. (Ignore Controller board)

If interested got my email make me an offer.

Email sent. Thanks

[andy_con]

It's normally the brushes in the top compartment that cause the issue.
You get a build up of carbon in there which conducts, blows fuses and burns

[Chaz]

It's normally the brushes in the top compartment that cause the issue.
You get a build up of carbon in there which conducts, blows fuses and burns

Top (looking at the motor mounted with the shaft in the lower position)? Just ensuring we are speaking of the same thing.

I am hoping a clean and brush replacement will work.

[rich.oliv]

Chaz I've got 3 x MTS30U4-36 working motors with 2 working Anilam SMA7215-1 drives and one dead one I'll sell.
The dead drive I think is probably easy repair or could even just be fuseed internaly but not checked. It Was working while I was messing around with it on bench. Turned it off then wouldn't come back on. Got new AC servos so never botherd with it just thru it in box.

Encoders on motor are 1000 line single ended but I've got some new 2500 quad Differential was going to fit so I'll sell those as well.

See pics. (Ignore Controller board)

If interested got my email make me an offer.

Hi, do you still have ny of these d.c motos? Many thanks,

Sent from my SM-N960F using Tapatalk

[Chaz]

Hi, do you still have ny of these d.c motos? Many thanks,

Sent from my SM-N960F using Tapatalk

Not sure if Jazz uses the forum anymore.

Ive got 3 x Bridgeport DC motors for sale - I think smaller than the main spindle motor, let me know if interested.

[rich.oliv]

Not sure if Jazz uses the forum anymore.

Ive got 3 x Bridgeport DC motors for sale - I think smaller than the main spindle motor, let me know if interested.

Thanks Chaz, can you send me pics of them or the spec, mine has a 9.5v tacho.

Sent from my SM-N960F using Tapatalk