3D printed Peristaltic Pump

[Leadhead]

Timely project Rob. Very interesting. Have most of the hardware also. Would be most grateful for .stl files and details of the Arduino setup.
Can it achieve enough air pressure to move wood dust or ally swarf?
Thanks for the posting.

[cropwell]

Timely project Rob. Very interesting. Have most of the hardware also. Would be most grateful for .stl files and details of the Arduino setup.
Can it achieve enough air pressure to move wood dust or ally swarf?
Thanks for the posting.

I only intend to pump liquid with PeriPump. I can get quite a good flow at a controllable rate (which is good when you get older !), The air will be provided from the compressor and solenoid controlled, so only full pressure and pulsed, although it might need a flow restrictor.

It is all at the playing about stage.

Cheers,

Rob