Advice on converting my VMC

[Proteus]

Jazzcnc, Thank you for Your thoughts :-)
Beleive me, i can not be talked into a solution i don`t feel comfortable with, but i don`t get easily scared of new solutions or technology either.
I am a self made man, learned electronics, computers and mechanics on my own, and to a level where i actually get employed by companies, and i`m proud of it.
I`m actually very curious about the GSX-990 Controller, and i will at some time next year incorporate it in my converted BF25 mill.
The VMC300 however is a cute little thing i want to make use of for smaller things, and will most likely run on a network 6 axis controller from Automation Technologies.
As for the ATC, i`m waiting for some pictures from a very helpful guy(The Engine Guy at CNCZone) who has the same machine, and where the ATC is controlled by some PLC.

My reason for this post is to get some feedback from you guys on choice of voltage and noise issues, experience with the 6 axis motion controller boards from Automation Technologies(or others),-
and issues with ATC communication.
I`m very curious with the CSMIO/IP-S and the HiCon Integra Controllers from Automation Technologies, claiming easy integration of Tool Changer.