-
Chris Where did you get the 4 orange pads on. Very nice as always.
..Clive
The more you know, The better you know, How little you know
-
04-05-2017 #42
Hi Clive
Got mine from here, but there are plenty of retailers these days: https://www.amazon.co.uk/Benchdog-98.../dp/B0037Z7D0A
Cheers
ChrisMy CNC Projects: https://www.youtube.com/imadethisoncnc
-
06-05-2017 #43
Hi Clive
Try this
http://www.ebay.co.uk/itm/Bench-Dog-...sAAOSw7GRZAeTG
-
-
29-06-2017 #45
Hi all,
Been a bit of a break since the last video on the Telecaster project due to the day job and spraying taking so long. Anyway here's a quick video on making a side dot marker jig/measure on the CNC router:
My CNC Projects: https://www.youtube.com/imadethisoncnc
-
29-06-2017 #46
Very nice jig Andy, this will eliminate the mishalighned side dots, cool!
-
29-06-2017 #47My CNC Projects: https://www.youtube.com/imadethisoncnc
-
29-06-2017 #48
OK Andy that you are actually Chris... Lol, you are welcome!
Last edited by Nickhofen; 29-06-2017 at 04:19 PM.
-
29-06-2017 #49
Nice work Chris. Once you have convinced yourself to put time into a jig to make a better job of it, it is always satisfying to put it use.
For a long time now I've not used a centre drill prior to a 3mm twist drill and found it holds an accurate position on the hole. For large bits I will centre drill though.
Did you need all that coolant for that job? I'll happily peck drill multiple 3mm holes with just an occasional dab on the drill bit from a brush.
Otherwise nice work, progressing well.
-
30-06-2017 #50My CNC Projects: https://www.youtube.com/imadethisoncnc
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
FOR SALE: CNC project
By amxen in forum Items For SaleReplies: 1Last Post: 20-12-2015, 09:19 PM -
NEW MEMBER: Hello My CNC UK community
By Xavi in forum New Member IntroductionsReplies: 2Last Post: 30-11-2015, 09:01 PM -
Community Shed
By Musht in forum General DiscussionReplies: 12Last Post: 06-10-2013, 12:15 PM -
Central South Community
By Leadhead in forum General DiscussionReplies: 1Last Post: 26-09-2011, 02:50 AM
Bookmarks