Community Project: Fender Telecaster

[Washout]

Next part of the Telecaster build is up and this time dealing with some walnut inserts on the neck:

[Washout]

Posted the next part of the Telecaster project - this time its a tutorial/walk through of Fusion 360 CAD for the body:

[ericmac]

Hoping to join in on the fun here. Recently got my homebuilt CNC up and running and am looking for a good project to run it through the paces!

[ericmac]

Id like to jump into this build. Can I get a copy or access to the Fusion files?

[Washout]

Id like to jump into this build. Can I get a copy or access to the Fusion files?

Hi Eric

Shoot me a PM with the email address you used to register to Fusion 360 and I'll give you access to the project - be very aware though that the CAM that's there is "tuned" to my machine so its best to take a copy of the CAD and do your own with feeds and speeds for your machine.

Cheers


Chris

[Washout]

Here's the next part where I walk through the CAM for a machine that can cut the whole body in one set of operations and also for a smaller machine where indexing is required (like mine).

[ericmac]

Hi Eric

Shoot me a PM with the email address you used to register to Fusion 360 and I'll give you access to the project - be very aware though that the CAM that's there is "tuned" to my machine so its best to take a copy of the CAD and do your own with feeds and speeds for your machine.

Cheers


Chris

Not sure if I already sent this to you... lll run my own cam, thanks a ton for the cad! Great videos! Please keep it up.




Sent from my iPhone using Tapatalk

[Washout]

Hi Eric

Good man - I seem to be getting a lot of requests for the CAM, from the uninformed that think they can load my GCode and press start on an X-Carve. That will only get them a floor full of broken machine parts if they try milling at 15mm depth on an 8mm cutter

Best to delete the email addresses off of your post there - bots will be picking those up and phishing will commence (Lee might be able to do this if he picks up on it first).

Cheers


Chris

[ericmac]

Hi Chris,
I haven't been able to find any files on A360 under either account? Is it shared through the fusion? Also, thanks for the HU regarding the email addresses!
Best,
Eric

[ericmac]

Hi Eric

Shoot me a PM with the email address you used to register to Fusion 360 and I'll give you access to the project - be very aware though that the CAM that's there is "tuned" to my machine so its best to take a copy of the CAD and do your own with feeds and speeds for your machine.

Cheers


Chris

Got it Chris... looks great!


Sent from my iPhone using Tapatalk