Community Project: Fender Telecaster

[mekanik]

Hi Clive
Try this
http://www.ebay.co.uk/itm/Bench-Dog-...sAAOSw7GRZAeTG

[Clive S]

Hi Clive
Try this
http://www.ebay.co.uk/itm/Bench-Dog-...sAAOSw7GRZAeTG

Thanks But the Amazon one's appear to be about £2.50 lower in price for the same product.

[Washout]

Hi all,

Been a bit of a break since the last video on the Telecaster project due to the day job and spraying taking so long. Anyway here's a quick video on making a side dot marker jig/measure on the CNC router:

[Nickhofen]

Very nice jig Andy, this will eliminate the mishalighned side dots, cool!

[Washout]

Very nice jig Andy, this will eliminate the mishalighned side dots, cool!

Its Chris, but thanks - I'll add the CAD to the Tele model download at some point as its a useful bit of kit for any 25.5" scale length neck.

[Nickhofen]

OK Andy that you are actually Chris... Lol, you are welcome!

[routercnc]

Nice work Chris. Once you have convinced yourself to put time into a jig to make a better job of it, it is always satisfying to put it use.

For a long time now I've not used a centre drill prior to a 3mm twist drill and found it holds an accurate position on the hole. For large bits I will centre drill though.

Did you need all that coolant for that job? I'll happily peck drill multiple 3mm holes with just an occasional dab on the drill bit from a brush.

Otherwise nice work, progressing well.