Mach 3 behaving badly?

[Neale]

Looks like I've stumbled into the same issue. I'm running (I think) .066 with a CSMIO-IP/M. I've been writing some tool height/tool change macros plus doing a bit of screen editing. I wanted an excuse to have a fiddle with the code and this looked like a nice little project. I freely acknowledge that a lot of it is based on various sources found on the web for tool-height setting. Basic Z height setting works fine - double-touch and everything, and based on the CS-Labs M31 macro. Under ideal conditions, repeatable to within a microstep or two even with some random rapids thrown in between measurements. On to "initial tool setting" - sets Z height in usual way, then touches off fixed touchpad to establish a reference. After a few problems involving work/machine coordinate settings, this seems pretty solid. Then the tool-change height setting, which just uses the fixed touchplate slotted in between m6start and m6end. I'm now seeing the soft limits issue, plus ePid errors.

Sounds like first thing to try is drop back to .028 - but I can't find anywhere to download it? Is there a standard place to go for this?

Thanks,

Edit - found it eventually. Hadn't thought of looking in Mach3 ftp download area before!