My machine...

[routercnc]

Some good progress there.
The Y axis rails on either side of the gantry is unusual. I'll have to see what you have in mind for the rest of it.
Also currently you will not have much Z travel with this design. Are you planning to cut sheets/panels only?
If not and you need to cut things with more depth you will need to raise the X rails extrusions (long ones) away from the bed on supports (raised X axis style).

[JW1977]

Thanks, im looking forward to show, its gonna take some time though.

The distance between whats going to be a spoilboard and up to the profile is about 150 mm. It does not look like that in the pictures but still its not much, im aware.
With the design i have in mind for Z (not 100% done yet) i will get roughly about 80-100 mm effective Z and that will do to start with.
There are some loudspeaker and RC projects im eager to get started with when the machine is up and running, first things first...

Yes, exactly! The design makes (raised X axis style) my plan B. It will probably get to that later.

Ive thought about the router build for like 2-3 years and i was going obsessed so right now im getting started. Goal is something strong which is easy to develop further.
Btw im using 1610 screws for Y and 1605 at X and Z. Effective area for X and Y will be roughly about 500x700.

[Poppey]

[QUOTE=JW1977;84389]
Not unlike my design. Here I use it as a 3D printer. I use reck&pinion on Y axis and timing belt on X. Y is 1205 ball screw. Y axis has 200 mm lift.

[JW1977]

[QUOTE=Poppey;84395]

Not unlike my design. Here I use it as a 3D printer. I use reck&pinion on Y axis and timing belt on X. Y is 1205 ball screw. Y axis has 200 mm lift.

Yes, you right! Nice!