Thread: Uc300 motion controller problems
-
07-11-2016 #1
Hi all and help
i am using or should I say trying to use a uc300, the installation of the software went tits up and failed a firmware update.
i have reinstalled all the software and can't get the uc300 to connect, there's a flashing led on the board which indicates a firmware problem. I presume that's why it won't connect, is there a way out of this mess.
by the way I am useless with pc's if that wasn't already evident
thanks in advance
-
07-11-2016 #2
USB or ethernet?
What version of the software?
Mach3 or UCCNC?
They have a support forum now, http://www.forum.cncdrive.com/index.phpLast edited by Ger21; 07-11-2016 at 01:33 AM.
Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
07-11-2016 #3
thanks Gerry
it was usb and mach3, i done a clean install and was able to update the firmware. working now cheers
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
DDSCV1.1 3 and 4 axis offline motion controller
By Boyan Silyavski in forum Chinese Stand-aloneReplies: 267Last Post: 14-05-2018, 06:57 PM -
FOR SALE: uc300 motion control board slighly used
By dazza in forum Items For SaleReplies: 1Last Post: 09-09-2015, 12:25 PM -
FOR SALE: uc300 motion control board slighly used
By dazza in forum Items For SaleReplies: 0Last Post: 09-09-2015, 12:23 PM -
Advice please! JAF Motion Controller issues!
By Mark Chard in forum Machine Control SoftwareReplies: 0Last Post: 31-01-2014, 05:03 PM -
USB and Ethernet Mach3 motion controller PLCM-E3
By Purelogic R&D in forum Manufacturer NewsReplies: 39Last Post: 29-12-2012, 09:38 AM
Bookmarks