Hybrid View
-
11-11-2016 #1
Lee -
Not really a channel. This is the first and only video I've posted:
https://www.youtube.com/watch?v=V0biZJSnepU
It is of the router I built in one of the first test runs.
Regarding the UC400 being a cut down version of the UC300, although the product numbering would lead you to believe otherwise, I think your're right. I bought the 400 because I wanted the best UCCNC controller and I thought that the 400 was the top of the line based on its product number and thats all the further I looked into it. I think the UC300ETH is better. It wasnt that much of an inconvenience to make the 400 work, just a couple extra components. And it is very fast! My servo's can handle a 500Khz data stream and the UC400 can stream at 400KHz very nicely. The ethernet connection can give you a lot of flexibility if you want to configure your network to work that way. I did not. I bought a dedicated computer to drive the router and simply used the ethernet cable just like one would use a USB cable.
Another thing I like about the UC400ETH is that you dont need another board like a smooth stepper etc. I used a breakout board like this: https://www.winford.com/products/brkg25.php Except mine has different connector that adapted to the UC400. Less than $25.
-
11-11-2016 #2
Nice machine.
It is not a cut-down UC300 at all, it is a completely different model. Yes, the numbering should have been different and according to me it should be called UC200ETH, but never the less, it is totally different design.
I was going to buy the UC400ETH because it had the Mach3 plugin available, but was contected by Balazs and he asked me to reconsider, not only because they were working on the UC300ETH plugin already, but also because they offered a UCCNC license with the UC300ETH during that period, so I went for the UC300ETH.
That breakout board is just a bunch of screw terminals, not optically isolated. I'd not use that with any of the CNC Drive products. There is even a warning about this in their manuals.
-
11-11-2016 #3The UC300 has 12V outputs, as well as 0-10V
Also, I think the analog voltage varies depending on which motherboard you use, and I don't think it does 0-10V without a breakout board, does it?Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
11-11-2016 #4
You are correct about the 0-10V output. I was confusing them with the analog inputs.
The 12V outputs on the analog port are not "outputs", but just 12V.
The UC300eth also has a 400Khz kernel speed.Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
12-11-2016 #5
-
11-11-2016 #6
I've got something similar but I've also got one of these: http://m.ebay.co.uk/itm/252307419456
...as well. There is so many options these days, i think moving away from LTP and/or USB is a good move though..Me
-
12-11-2016 #7
Yes, definitely agree that LPT and USB are not exactly optimal year 2016.
BTW, I have two identical BOBs. They also have 0-10V and are very goodand in my opinion. That BOB has six optically isolated inputs which are driven separately from the 5V logic if connected properly, outputs are through buffer driver and the relay is useful.Last edited by A_Camera; 12-11-2016 at 09:39 AM.
-
12-11-2016 #8
Well had a look at the 300ETH manual and it's not exactly helpful is it ?
22 Pages, 20 of which tell you how to connect the ethernet and then a scant 2 pages giving the wiring of the pins.
aHowever they are all marked output 1, output2, etc, Analog 1, analog 2
Would it really hurt these peole is they supplied a diagram for a working 3 or 4 axis machine with VFD ?
You know it just might, note I said might, improve sales because at the moment anyone who isn't an EE is totally fazed by what has been released.
BTW can it do multiline encoder for lathe ?John S -
-
12-11-2016 #9
The UC300ETH basically has 5 parallel ports. There are different motherboards available which dictate the input and output pins.
Two ports are standard, and 3 ports use pins 2-9 as inputs.
The CNC4PC M44 board has 3 parallel ports, and two special ports, one for inputs, one for outputs. One of the 3 is standard and two use pins 2-9 as inputs.
You plug in your breakout boards and wire it any way you want, just like a standard parallel port.
The analog I/O uses a separate header.
There is no lathe screen at this time. It does rigid tapping, so it may be able to use a multiline encoder. Not positive, though. Send them an email, they are very good with customer service.Last edited by Ger21; 12-11-2016 at 02:32 PM.
Gerry
______________________________________________
UCCNC 2022 Screenset
Mach3 2010 Screenset
JointCAM - CAM for Woodworking Joints
-
The Following User Says Thank You to Ger21 For This Useful Post:
-
12-11-2016 #10
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
CNCdrive.com Cheap Servo drives
By BillTodd in forum Marketplace DiscussionReplies: 2Last Post: 13-06-2017, 11:38 AM -
Anyone using CNCdrive products?
By gatesy in forum Machine DiscussionReplies: 20Last Post: 27-12-2015, 11:13 AM -
Huanyang VFD control plugin for Mach3, USB RS-485
By JayPunchbuggy in forum Spindles & Drive MotorsReplies: 19Last Post: 15-05-2013, 08:00 PM
Bookmarks