Yet another Denford for the collection (Triac Retrofit thread)

[andy_con]

Hi, Do you still have the motion control card (electronics) you stripped off the machine. Precisely, I need a working “baldor D281 motion control card for a TRIAC P. C., red 7-segment LED display type".

If I was a mod on this forum Id ban you for spamming

[Tommy]

What makes you think i am spamming. Why would i be spamming a CNC forum, is it that I dont have any job to do?

I am only posting in numerous threads that I believe are relevant to my need, which is to obtain a working denford controller card

The post by "m_c" shows an image of the card (which you might no longer be used) and that is why i replied to "m_c"'s post

So i still ask, do you still have the Triac controller card that is shown in that picture in that post. Cheers.

[Tommy]

If I was a mod on this forum Id ban you for spamming

What makes you think i am spamming. Why would i be spamming a CNC forum, is it that I dont have any job to do?

I am only posting in numerous threads that I believe are relevant to my need, which is to obtain a working denford controller card

The post by "m_c" shows an image of the card (which you might no longer be used) and that is why i replied to "m_c"'s post

So i still ask, do you still have the Triac controller card that is shown in that picture in that post. Cheers.

[andy_con]

Cos any normal person would go into the wanted section and make a single post asking what they wanted.

It's the whole point of a wanted section

Like I say lucky I'm not a mod

[Tommy]

Cos any normal person would go into the wanted section and make a single post asking what they wanted.

It's the whole point of a wanted section

Like I say lucky I'm not a mod

Pls just stop with the insults. May be that is why you are not a mod. I a new to the forum, never knew there is a wanted section. May be you should tell the moderators not to allow newbies to post until they have gone thru an "intro". Just chill and pls just get off my back, unless you have the card I am looking for.