Thread: Help with haas vf0e
-
18-11-2018 #31
We can repair your Haas processor board if you ever have this issue again.
Worldwide Industrial Solutions
https://wisrepair.com/
-
19-11-2018 #32
even if the faulty power supply did not damage any of the boards
the odds are that the data on the hard drive, cmos RTC or eproms will be corrupted
and you will need to re install the operating system and / or machine parameters
as in this post "Rebuild Hurco Power Supply w/ PC Power Supply VMX30" for example
https://www.cnczone.com/forums/hurco...facturing.html
John
PS
note if you are replacing an old AT power supply
with a new AXT supply
the orange AT power good signal wire = the grey power good wire on the ATX supply
don't get it mixed up with the orange 3.3V ATX output wire !!
ready made adaptors are available
Last edited by john swift; 19-11-2018 at 12:47 AM. Reason: add PS
-
19-11-2018 #33
The poor support and large charges from Haas for stuff that could be user executed put me right off their machines.
You think that's too expensive? You're not a Model Engineer are you? :D
-
19-11-2018 #34
check out our youtube channel. we video all of our repairs for our customers. we want you to know that your boards are repaired and working
https://www.youtube.com/channel/UCMb..._as=subscriber
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Haas Hl2 lathe assitance S70 area
By MAW in forum Lathes, Lathe Rebuilding & ConversionsReplies: 2Last Post: 05-09-2016, 08:09 AM -
Haas mini mill spindle ramp up time
By Hellfire in forum Machine DiscussionReplies: 2Last Post: 16-05-2016, 10:33 AM -
Haas vf-0e 1995
By jackpat in forum Machine DiscussionReplies: 0Last Post: 13-05-2016, 11:18 AM
Bookmarks