Quote Originally Posted by magicniner View Post
If there's no visible component damage even when viewed with high magnification you're dependent on someone with test equipment and the test data for the board.
Are you sure the PSU/s is/are delivering all the correct voltages? (checked with a meter)
Ok, so i checked the voltages today... on 5v we are getting about 1.5, and on 12v we are getting about 3.5! a tech suggested i get an atx power supply to try, so ive just been and got one from maplins. Is there anything i need to make sure i do/ dont do so i dont toast anything else?