. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 15-11-2016 #6
    magicniner's Avatar
    Lives in Rotherham, United Kingdom.
    magicniner
    Last Activity: 05-05-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 2,021. Received thanks 230 times, giving thanks to others 42 times.
    If there's no visible component damage even when viewed with high magnification you're dependent on someone with test equipment and the test data for the board.
    Are you sure the PSU/s is/are delivering all the correct voltages? (checked with a meter)
    Last edited by magicniner; 15-11-2016 at 10:46 PM.
    You think that's too expensive? You're not a Model Engineer are you? :D
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Haas Hl2 lathe assitance S70 area
    By MAW in forum Lathes, Lathe Rebuilding & Conversions
    Replies: 2
    Last Post: 05-09-2016, 08:09 AM
  2. Haas mini mill spindle ramp up time
    By Hellfire in forum Machine Discussion
    Replies: 2
    Last Post: 16-05-2016, 10:33 AM
  3. Haas vf-0e 1995
    By jackpat in forum Machine Discussion
    Replies: 0
    Last Post: 13-05-2016, 11:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules