Hybrid View
-
21-01-2017 #1
Last Activity: 03-08-2017
this is the final design for the y axis drive,the motors will be tucked away under the table, it doesnt take alot of spring pressure to hold the pinion into the rack.i can now get full travel accross the whole table...
Last edited by warwick; 21-01-2017 at 06:33 PM.
-
23-01-2017 #2
Last Activity: 03-08-2017
iv managed to finish the reduction gearboxes and mount them today,have ordered the cable so i'll be wiring very soon!!
-
27-01-2017 #3
Last Activity: 03-08-2017
iv got the cable drag chain carrier fabbed up,just the ends of the x axis linear rails to support and im finished the fabricating...
-
29-01-2017 #4
Last Activity: 03-08-2017
all the switches are mounted
-
29-01-2017 #5
Last Activity: 03-08-2017
all the cable runs are in and threaded through the cable drag chain..
-
02-02-2017 #6
Last Activity: 18-12-2023
looks great man fair play, very jealous!
-
03-02-2017 #7
Last Activity: 03-08-2017
and the fun begins!!!!
ok the problems begin....there isnt enough pins on my bob to run my proma thc and another axis for the rotory or the air scribe...so a friend has a uc400 knoocking about that he hasnt got around to using yet...Last edited by warwick; 10-02-2017 at 02:34 AM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Have you built your own CNC plasma table ?
By adscnc in forum Opportunities Available & SoughtReplies: 0Last Post: 15-09-2016, 02:13 PM -
Plasma table 4x4 kit and electronics
By whensparksfly in forum Items WantedReplies: 1Last Post: 27-02-2016, 01:37 PM -
10' x 5' Plasma table design
By Kerryfisher in forum Plasma Table MachinesReplies: 4Last Post: 20-02-2013, 09:28 AM -
RFQ: RFQ: Plasma Table
By D-man in forum Projects, Jobs & RequestsReplies: 3Last Post: 04-07-2010, 11:08 PM -
Plasma table 2m x 1m
By Robin Hewitt in forum DIY Plasma Build LogsReplies: 9Last Post: 19-05-2009, 12:48 PM
Bookmarks