village idiot builds a plasma table.........

[warwick]

managed to get it wired up and have started configuring it...after a few attemps it now travels 1000mm accuratly x and y axis...the gantry was 3mm out of square over a 1000 x1000 square have now got it down to .75mm and should have that near perfect tommorow......

[warwick]

have got all the soft limits set up and the machine is running with a pen, JAZZ gave me an hour of his time via the phone and was a big help with sheetcam his cock turned out to be massive and we are working on making it a bit smaller....the pic is the first thing weve taken through inkscape,sheetcam,mach.....

[Clive S]

his cock turned out to be massive and we are working on making it a bit smaller

Well we all have that problem

[ned]

excellent mate, brilliant stuff, congrats!

[JAZZCNC]

JAZZ gave me an hour of his time via the phone and was a big help with sheetcam his cock turned out to be massive and we are working on making it a bit smaller:whistle

Twat I've already had piss taken 3 times this morning. . . . . . So let me just clarify what warwick eluding too.!!

[Web Goblin]

He even cleaned it as well before giving it to you.

[JAZZCNC]

He even cleaned it as well before giving it to you.

Without being too Cocky.!! . . . Nope I did that as well he just set me up for having piss taken. . .

[warwick]

Twat I've already had piss taken 3 times this morning. . . . . . So let me just clarify what warwick eluding too.!!

im so sorry dean, when you said you werent familiar with sheetcam i didnt realise you would be ridiculed for using it....
ps my mrs says thats the largest cock shes ever seen and shes seen alot of cocks...

[JAZZCNC]

ps my mrs says thats the largest cock shes ever seen and shes seen alot of cocks...

Things always look bigger in mirrors and the virtual world I'll set her straight when I come visit, should give her laugh if nothing else..

[warwick]

finally tracked down a machine torch and have got it mounted..iv used four magnets and a few domed head bolts