Threaded View
-
22-11-2016 #2
PS. With the rigidity concern in mind, I did run a little "marker" cut - to put a 20mm long slot in a piece of MDF to act as a place marker. I then MDI for 100mm along an axis. Then run a second marker cut, and measure the distance between the two markers. This meant that the axis being measured was completely stationary during cutting. The measured error between markers was very much present. So again this suggested to me that the less than ideal rigidity was not my main issue here......
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
mach 3 scaling issue
By terry1956 in forum Artsoft Mach (3 & 4)Replies: 22Last Post: 01-02-2019, 11:32 AM -
Up-scaling CNC Sidewinder to cut 8x4?
By toby in forum Machine DiscussionReplies: 4Last Post: 11-05-2015, 09:15 AM -
Motorcalc spreadsheet errors
By jimbo_cnc in forum General DiscussionReplies: 7Last Post: 10-03-2015, 07:02 PM -
What the hell do I need ?? (humourous replies expected :-) )
By alboy in forum Marketplace DiscussionReplies: 9Last Post: 08-09-2013, 12:42 PM -
Two ball screws for my x axis and two motors, do i need two drivers?
By luke11cnc in forum Gantry/Router Machines & BuildingReplies: 26Last Post: 12-08-2011, 12:55 AM
Bookmarks