Spindle being awkward.

[MPH100]

Well have spent Saturday morning trying various things no joy so before I get magic smoke time to cut something will save up for a CSMIO/IP-M me thinks.

[Clive S]

Well have spent Saturday morning trying various things no joy so before I get magic smoke time to cut something will save up for a CSMIO/IP-M me thinks.

You need to upload your xml file etc like Jazzcnc has asked. Have you tried to upload via the advanced option.

[cropwell]

Please reassure me that you have the PC side of the BoB connected to ground and 5v from the computer (using the USB cable or the teminals bottom left in your photos)

Cheers,

Rob

[MPH100]

I have checked the connections and added an extra ground still to no better, the relay switches on/off when feed is engaged manual or program dont know what is controlling it

[cropwell]

I have checked the connections and added an extra ground still to no better, the relay switches on/off when feed is engaged manual or program dont know what is controlling it

What about the 5v from the computer !!!

[MPH100]

I have 5v power supply feeding Ess and bob keep checking voltage seems fine

[cropwell]

I have 5v power supply feeding Ess and bob keep checking voltage seems fine

So I presume the photos you uploaded of the BoB are not showing the current state of the connections and there is 5v and ground from the computer connected to the USB socket or the PC 5v power terminals in the bottom left hand corner. - Rob

[MPH100]

Mach3Mill.zipMach3Mill.zip Hope this worked

[MPH100]

Good to see I can nearly get that right.