syil x4

[John S]

John,

Siyl are not Seig.

Siyl Uk is Amadeal if I am not mistaken. Machines are ok in terms of castings and the price as per their site is reasonable.

Geoff,

worth reading up on them on cnczone.com

I know of them quite well. Bad press is greater than good press. There is a recent post on this forum where a new owner can't get his working correctly and no support.

[geoff]

john

don't now where this post is?
but they have a tech guy Robert
who I have talked to who will come and set the machine up for you
if you ring hugh at syil he will give you the number
I really just need to known will these machine cut metal
has anyone used one ?
I have talked to users with good feed back

thanks Geoff

[cropwell]

I know of them quite well. Bad press is greater than good press. There is a recent post on this forum where a new owner can't get his working correctly and no support.

Original post is Syil-X4-Plus-E-stop-issue.

As I understood from the post, that new owner does not own a new one, in fact quite an old one. I know that Syil electronics were not the best as they used Tonman BoB and Drivers at some stage. That is the same control box electronics that a company in Devon sells or used to sell, so they must be crap.

The real problem is that Syil have changed their electronics more often than some engineers change their underpants, so you will only know what is in the box when you look. It also appears that the previous owner of the machine in question has fiddled with the machine, so anything is possible.

Most of the chinese origin machines available originate from Weiss (http://www.weiss.com.cn/), and people like Warco, Axminster, Chester, Amadeal just order them up painted in their particular colours and badged accordingly. It would be interesting, if I had the time, to look at the various websites and make a spreadsheet of the equivalent machines and prices. It probably would show a remarkable coincidence, and who you buy from would be just down to your perception of value and service.

I know that Amadeal have given me good service in supplying parts to allow me to do mods to my lathe, and I cannot imagine that they would shirk on customer service in their Syil dealership role.

Cheers,

Rob

[m_c]

I have previously compared some of the models in terms of specs, and most do vary. In the past I've compared various SX2 size models, and the G0704 sizes.
Things like slightly differing amounts of travel in axis, different spindles, different spindle motors, and even machines with very similar specs look visually different in photos.
I suspect lots come out of the same factory, but they all get customised to some extent for each purchaser.
.
John probably knows these machines far better than most on here, especially Sieg machines.

[komatias]

Original post is Syil-X4-Plus-E-stop-issue.

Most of the chinese origin machines available originate from Weiss (http://www.weiss.com.cn/), and people like Warco, Axminster, Chester, Amadeal just order them up painted in their particular colours and badged accordingly.....

True, and then there are some that actually go to the factory that Weiss buys from