Quote Originally Posted by JoeHarris View Post
On the subject of detail and having just been working on this bit - I would change your gantry end plates a bit. I had almost that exact design at one stage but changed it to an end plate and a separate plate connecting the ballnut to the end plate (see my last post on my thread if your not sure what I mean). Lining everything up can seem easy in sketchup but as Dean says the DIY factor certainly strikes when your in the real world and you will want to be able to adjust things easily when you are trying to align the screw to the rail.
I will be doing that then Joe, As all my sketchup learning and practice was done by copying your drawings from your build log on page 15, hence why you recognise the design!
I now realise why you have changed the design, I was begining to ponder the frame building / gantry fitting together problems but see you have the answer.

Many thanks again for the advice.