Project Beaver

[JoeHarris]

Joe please don't stress too much over this. My comments where more to help others avoid similair issues and not to pull you down or have you start with major redesign etc.

Now you have it done this way then I'd suck it and see. If the gantry is long way from square then you may need to do some shimming. Anything you can do to make sure Y axis is 90Deg to X axis the better. Try to avoid using the screws to square the gantry as it will put binding on the bearings etc.

Thanks Dean, I figured I would suck it and see just wanted to talk though the options if needed...


Sent from my iPhone using Tapatalk