. .

Thread: Project Beaver

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 06-12-2016 #11
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by OMLCNC View Post
    So is this what you propose, (Two plates marked in green) to be drilled with oversize holes and the bearing plate to be tapped to accept bolts, when finished adjusting, drill, ream and pin together?

    Other green items added are the table adjustment brackets.
    Yes make the plate just little longer than needed so can get some bolts on back side. This is Cad of machine just built using the same setup not got any pics of real thing but can take some tomorrow if you want to see it.
    This is R&P machine and the Gantry needs to able to be removed for access to building but wanted to leave the Motors etc in place so minimal setup when replacing.

    Click image for larger version.  Name: gantryend.png  Views: 2117  Size: 333.5 KB  ID: 19836 Click image for larger version.  Name: gantryend2.png  Views: 2091  Size: 221.2 KB  ID: 19840

    Edit: Found this on my phone if zoom in can see the plates.

    Click image for larger version.  Name: IMAG1062.jpg  Views: 2212  Size: 535.1 KB  ID: 19841
    Last edited by JAZZCNC; 06-12-2016 at 09:46 PM.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Beaver NC35 Mill
    By sshep71 in forum Milling Machines, Builds & Conversions
    Replies: 7
    Last Post: 14-09-2024, 11:01 PM
  2. FOR SALE: CNC project
    By amxen in forum Items For Sale
    Replies: 1
    Last Post: 20-12-2015, 09:19 PM
  3. Bound Quill on a Beaver BVRP
    By 87bob in forum Milling Machines, Builds & Conversions
    Replies: 0
    Last Post: 12-08-2014, 02:51 AM
  4. NEW MEMBER: Logging in to follow Andre's Beaver mill conversion
    By Damocles in forum New Member Introductions
    Replies: 1
    Last Post: 05-09-2010, 01:32 PM
  5. Beaver on eBay
    By irving2008 in forum General Discussion
    Replies: 4
    Last Post: 22-01-2010, 09:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules