3 ball screws ~ 1000mm long

[fifa]

Good day

14 mm is not a dimension widely manufactured. Typically it is 16 or 12mm.

What is axial force? 12x5 can go up to 1800N, however with 1000 mm length bulking is already an issue (not a case if you are using only "pull" force). What is the max. rpm (feed rate).

For diameters up to 20mm, ball nut load capability is typically much bigger than capability of the bearings.


Ball screw Unit price Ball screw nut Unit price
SCR1204*1000mm $7.95 SFU1204 $7.95
SCR1210*1000mm $10.59 SFS1210 $17.65
SCR1604*1000mm $8.83 SFU1604 $8.83
SCR1605*1000mm $7.95 SFU1605 $7.06
SCR1610*1000mm $7.95 SFU1610 $7.95
SCR2004*1000mm $10.59 SFU2004 $10.59
SCR2005*1000mm $9.71 SFU2005 $8.30
SCR2010*1000mm $11.48 SFU2010 $11.48


Prices from one of the china supplier.
DHL = ca 200$, delivered within one week.
End shaft machining 30 $
custom...


regards

martin