. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 22-12-2016 #8
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 12 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 83 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by Gregor View Post
    I know you shouldn't buy anything until I have the design finished but i have been offered 3 X AM882 drives for £110 would this be a good buy and work well for this machine, With my knowledge off electrics not great i want to keep the electrics as simple as possible .After reading some more build logs am i right in thinking that 1610 ballscrews all round would be ok for this machine with Nema 23 Stepper Motor 3Nm all round or Nema 23 Stepper Motor 4Nm?
    Cheers Greg
    Greg If the am882 drives are in good condition then they will be fine . 1610 on X and Y. 1605 on Z nema 23 are good as long as you get them with low inductance the 8 wire version. Zapp or cnc4you have the correct one's
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to Clive S For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: New Build - For Your Amusement - MK-2 build
    By Karl in forum DIY Router Build Logs
    Replies: 12
    Last Post: 08-02-2017, 08:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules