Thread: Next stage is Plasma add on...
Threaded View
-
07-12-2016 #1
Hello all i have completed my cnc build and as stated i have bought a Hypertherm 45 with T45 machine torch.
I am in the process of adding it to my table and would people recommend a floating head or a static head as weeks of searching google and peoples opinion differ....some are spring loaded, some solid and others hybrid etc etc.
2nd question is the elctrical connection to my THC from purelogic.
Am i right in stating the connections from the HYPERTHERM going to the PURELOGIC THC are
Hypertherm Purelogic
Start (start plasma) = Arc Ok output
Transfer (start machine) = Torch fire input
Ground = Ground
Voltage divder = HVAC output.
I have bought the T45M and it came with the lead as shown in the photos below and i have a feeling that i will need another cable as this one only has 3 cores even though it shows 2 used.
Any thoughts, alterations or comments good or bad welcome.
Cheers TommyLast edited by Skiprat; 07-12-2016 at 10:07 PM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
BUILD LOG: Design stage of 4030(ish) for wood and plastic
By andy586 in forum DIY Router Build LogsReplies: 4Last Post: 14-11-2013, 10:07 PM -
RFQ: Plasma job...
By Boscoe in forum Projects, Jobs & RequestsReplies: 3Last Post: 17-09-2013, 08:43 PM -
My first CNC plasma
By Walterronny in forum DIY Plasma Build LogsReplies: 30Last Post: 20-02-2013, 02:13 AM -
plasma cad
By jamied in forum Computer SoftwareReplies: 6Last Post: 20-08-2010, 03:33 PM -
Small Mill very early design stage
By leadinglights in forum Milling Machines, Builds & ConversionsReplies: 29Last Post: 15-06-2010, 01:05 AM
Bookmarks