Next stage is Plasma add on...

[Skiprat]

I have bought a new plug and connectors / pins and have wired the plug to suit the diagram as requested.

The machine wont fire from program and i think i must be missing some gcode or macro input as i have tried every conceivable combination of pins and outputs but nothing seems to work.

I have got the full bought versions of sheetcam and mach3 so these shouldn't be a problem. the post processor i am using is the purelogic with fr one which was one off 7 available and it doesn't tell me which one is the best.

I have used the independent button to start of arc and cut the following square as seen but i would like to get it to fire via the software / program.