Thread: Next stage is Plasma add on...
Hybrid View
-
07-03-2017 #1
hi, i only know what iv done on mine and nothing else so im probably not going to be much help..........
iv used the relay on the bob to trigger a bigger 24v relay to fire the plasma.........is it firing the plasma on mach?.....
-
07-03-2017 #2
Hello Warwick....not had it firing from mach yet only from pendant button. I made my own plug as the cheapest i could find was £86 + vat from a uk source for a 6 pin version. I got the plug wire and pins from RS for less than a Tenner so this was a massive saving.
The lead i made has continuity etc but i think im struggling with the pin outs.
As the pictures show i have a purelogic THC which is made for the hypertherm 45 and this is connected with an ethernet lead so not real sure what pins i need if any. My floating head has a micro switch on it which i have configured for both Z home and Probe scenarios but nothing happens.
I think i am missing some code / script as all the ones i have used have worked for finding top of material but i think i am missing the trigger scripts if that's what you want to call them.
So basically if you have any ideas or could share your scripts etc, i will be very grateful as no doubt, once it works it will be looking at me straight in the eye.
I do have the RS codes for the leads if anyone wants to make their own and save a massive amount of money instead of buying a hypertherm one.
Cheers Warwick and thanks for your reply.
Cheers TommyLast edited by Skiprat; 07-03-2017 at 08:00 PM.
-
08-03-2017 #3
hi, iv two micro swithes on my z axis.top is machine home..bottom switch on slide is probe.g31 a very kind fella off the forum set up sheet cam to put the gcode into anything it post process's.........
thc ...havent a clue, im using a proma sd and struggling to get it working well....
can let you know how my 6 core cable is wired......
cheers
-
08-03-2017 #4
Hello Warwick...
The six cores i have wired up with the full 6/7 cores inc ground so same as you, i have all avenues covered.
Just the gcode and scripts is what i am struggling with.
Scoured the internet and cant find a dummies guide to floating heads etc as they all have different pin out names etc.
The proma you have, has quite a few explanations online with pictures but mine has none or very few with minimal explanation.
I would like a schematic of someone else's to scrutinise and once i have mine working, i will post mine on line with pictures for other people to look at as a picture tells a great story if you know what i mean.
I will keep experimenting untill i get the thing working....LOL
Cheers Tommy
-
08-03-2017 #5
its a very lonely place is the plasma section on any forum!!!!!`
the web is a nightmare for conflicting thoughts and nobody really posts the outcome of all the problems you are going through....
ill sort out the pins i have used and let you know.....
-
08-03-2017 #6
Many thanks Warwick
Do you have yours set to spindle, thc on thc up thc down etc etc as these are all the scenarios i am looking at and everyone seems to have a different solution but if you have a hypertherm 45 at least we have this in common...
As usual sorry about all questions but as you have experienced, it is a pain in the butt and frustrating.....i.e so close yet so far away from a fully working machine.
Thanks Tommy
-
09-03-2017 #7
hi, im using a mill screen at the moment and mine is indeed on spindle......my plasma screen set just crashed alot and caused problems, i think that i need to reinstall mach ..
on the mill screen im not getting a torch ok signal so my proma thc isnt working at all,which isnt a bad thing from the performace iv had off the dam thing....
may have another go at getting it running tommorow...............
oh and just to kick you a little more while your down!!!! ya compressor needs to be a beast...iv got a brand new italian cheap 12cfm compressor and when cutting 200mm tall letters i was getting one and a half letters before i had to feed hold mach and let the comp catch up........
cheers woz
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: Design stage of 4030(ish) for wood and plastic
By andy586 in forum DIY Router Build LogsReplies: 4Last Post: 14-11-2013, 10:07 PM -
RFQ: Plasma job...
By Boscoe in forum Projects, Jobs & RequestsReplies: 3Last Post: 17-09-2013, 08:43 PM -
My first CNC plasma
By Walterronny in forum DIY Plasma Build LogsReplies: 30Last Post: 20-02-2013, 02:13 AM -
plasma cad
By jamied in forum Computer SoftwareReplies: 6Last Post: 20-08-2010, 03:33 PM -
Small Mill very early design stage
By leadinglights in forum Milling Machines, Builds & ConversionsReplies: 29Last Post: 15-06-2010, 01:05 AM
Bookmarks