Triac coordinate issue....we think!

[camhguh]

[QUOTE=m_c;86159]If it's windows based, then it should be VR Milling 2 or 5. Prior to that, I'm not sure of the name.

Although for simplicity having machine zero at the front left corner of the table makes sense, as then all travel is in a positive direction.

Thats what we expected as well but but the workpiece appears to be in the in the negative coordinates area which we cannot fathom out. We have looked at the information in the manual multiple times but are still scratching our heads!

Yes it is VR Milling 5 that we are using.

Im sure we will work it out eventually.

Thanks for trying to help, much appreciated :)