Waterproof CNC Router Cutting bed

[Boyan Silyavski]

Trespa Athlon is exactly the same i was saying plus thin melamine both sides.In fact its exactly what i am using, i told you - McDonald doors Its paper/wood phenolic. because of the melamine could be e bit more expensive than the ones i pointed to.

Though in my experience with laminates, there are 2 more varieties that are looking same as phenolic but they suck water and dont resist so much as it. So i assume that the Trespa Athlon that for sure is phenolic will be the "fire retardant version"

So why you just dont go with the Tufnol 1P13 which is most accessible as price.


And No, it will NOT be rigid enough. Whatever sheet you use apart from steel or aluminum will not be rigid enough that size 15mm . It must be combined on top of sth else.

TRESPA® ATHLON®
Decorative high-pressure compact laminates according to EN 438-4:2005 of thicknesses of 6 mm (± 1/4 in) or greater for indoor applications. Sheets consisting of layers of wood-based fibres (paper and/or wood)
impregnated with thermosetting resins and surface layer(s) on one or both sides, having decorative colours or designs. The surface layers are impregnated with melamine based resins. These components are bonded
together with simultaneous application of heat (≥ 150° C / ≥ 302° F) and high specific pressure (> 7 MPa) to obtain a homogeneous non-porous material with increased density and integral decorative surface. They
are available in the Standard grade (CGS) and in the Fire-Retardant grade (CGF).