Quote Originally Posted by magicniner View Post
Knowing a change in diameter over a fixed height it's a really easy bit of fag packet sketchery and school trigonometry to calculate the taper angle -
Sine - Opposite/Hypotenuse
Cosine - Adjacent/Hypotenuse
Tangent - Opposite/Adjacent

Do they still teach the basics at school? I meet so many people who don't seem familiar with them I do wonder,

- Nick
This is basic Math Nick, but the Challenge is to measure 100% correct top diameter on the taper and correct distance in between(the taper top i slightly rounded).
Tryed to improve my measurements and got lower dia at 31,61, top dia at 20,9 and length at 30. This gives a Cone angle α = 20.24° = 20°14' , taper 35.7%.
This is definately no standard taper in my opinion...