Thread: How hard is it to weld a frame?
Hybrid View
-
15-12-2016 #1
Thanks warwick, i am buying a mig welder but gasless so will be spending sometime practicing and will be posting results up before i start on the frame to see what you guys think
-
16-12-2016 #2
Dont buy gassless
Buy a normal one and a CO bottle from some bar for next to nothing. Together with the regulator. Thats how i started. Of course i was not thinking like you and bought 250AMP welder which i am very happy with. It cost me around 350 euro only from ebay. Its working like a champ.
-
16-12-2016 #3
Thanks mate, I was told I need a licence for gas but if I don't then I would go gas
-
16-12-2016 #4
Reefy,
what country you in? In the UK there is no need for license to get Argon or CO2 for welding. There is of course a cost associated with the use of the gas canisters. Again in the UK you can look for rental free gas, where you get charge a deposit and refill charge as opposed to having to sign up to a yearly contract.https://emvioeng.com
Machine tools and 3D printing supplies. Expanding constantly.
-
16-12-2016 #5
I welded my router frame up using a 90A SIP stick welder off ebay, as well as the professional MIG welders I had access to at my old work. If you cut the metal accurately, take your time positioning and tacking and have a large hammer and a grinding disc/cutting disc along with lots of patience then you can easily weld up an accurate frame, especially if you're planning on using epoxy for levelling. Secret is not to put too much heat into any one bit, so tack then move on to a bit on the opposite side and tack etc. leaving plenty of time for things to cool down.
-
16-12-2016 #6
thank you and I live in the uk so that's good then :)
-
05-07-2017 #7http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
Tig weld rack and pinion to cnc plasma frame?
By warwick in forum Plasma Table MachinesReplies: 19Last Post: 10-12-2016, 07:39 PM -
Turning hard materials
By Harry Hills in forum Metalwork DiscussionReplies: 16Last Post: 07-02-2016, 04:49 PM -
Best place for hard stops?
By mitchejc in forum Gantry/Router Machines & BuildingReplies: 4Last Post: 25-11-2014, 06:39 AM -
RFQ: Why is it so hard...
By ktc in forum Projects, Jobs & RequestsReplies: 10Last Post: 11-08-2013, 08:05 PM -
RFQ: Hard colour anodising
By Mixster in forum Projects, Jobs & RequestsReplies: 10Last Post: 11-03-2013, 10:58 PM
Bookmarks