Ger21's UCCNC 2017 Screenset Preview/Introduction

[Ger21]

I left a page in the screen to prove some yet to be determined ATC support.

The next version of UCCNC is supposed to have slot numbers in the tool table to facilitate ATC macros.
Once that version is released, I'll start looking into what I'm going to do.

I don't think it needs to be carousel or linear rack specific, as both do basically the same thing. Unless you want to manually do specific caraousel operations.

Feel free to tell me what you'd like to see. And be very specific.

[A_Camera]

Here's an introduction to a new project that Ger21 (Gerry) has been working on, It's a screenset for UCCNC, which is a CNC control software program from CNC Drive.

Currently being beta tested, and hopefully available soon, It's designed to be run on a HD monitor, adding auto zero and probing functionality along the way.

It's nice, but in my opinion, Start, Stop, Hold and Reset should all be large buttons, coloured and should be placed all to the right or at the bottom. As it is now, it is not ergonomically correct and not as easy to find and hit the right button as it would be with better colouring and placement.