Thread: Wiring Huanyang HY02D223B
Hybrid View
-
03-01-2017 #1
Hi all.
Just updating about my Huanyang.
eBay sellers refusing refund/ exchange
Here's what happened.
Wired L to R and N to T and earth to E(9)
Tripping RCD, twice, checked connection, have read manual, contacted eBay seller about wiring (he send me video) and scheme.
I've checked wires, wiring, exchange few messages here
Tried again and it burned.
Thanks all for support.
Buying cheap/ buying twice. ( I learned)
-
Stan sorry to hear about the seller refusing but I think you will have to contact eBay.
These VFD's are very well known on this forum I bet 90% have them and are happy me included so it is very unusual for one to be faulty (but it does happen).
If like you say you connected it correctly and it tripped then it was faulty...Clive
The more you know, The better you know, How little you know
-
The Following User Says Thank You to Clive S For This Useful Post:
-
03-01-2017 #3
I agree. You have to go through eBay, not just sending a message to the seller. The seller will react differently after you have raised a claim via eBay. Don't waste your time, just click on that claim button. You will get a response from eBay and every communication is logged after that. It takes a few weeks but you have a better chance.
-
21-03-2017 #4
Hello All,
I've got exactly the same problem today with the same inverter.
Connected 220V (single phase) to R and T.
Powering up (like describe in the seller's mail and in the video)and..... a good smoke machine
I sent a ebay message to seller and am waiting for its reply and hope a exchange.
How did your story finish?
Onap
-
21-03-2017 #5
-
21-03-2017 #6
Hi Onap.
If the Ebay seller does not replying, and you have tried couple of times, you have to go to " Resolution centre " and " open new case " against the seller and that should help.
-
25-03-2017 #7
Hi,
Sorry for may later answer.
I sent an e-mail to the seller and he will send me a new inverter.
Yesterday I sent back the defect one to Germany.
Wait and see
onap
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Mach3 Controlling Huanyang HY02D223B 2.2KW VFD
By Mad Professor in forum Spindles & Drive MotorsReplies: 34Last Post: 01-10-2016, 10:21 AM -
help connecting a pot to huanyang vfd 2.2
By edgas10 in forum General ElectronicsReplies: 15Last Post: 14-08-2016, 06:45 PM -
Huanyang hy02d223b frequence convertor problem
By frans cop in forum Motor Drivers & ControllersReplies: 3Last Post: 14-07-2015, 10:33 AM -
Huanyang VFD control plugin for Mach3, USB RS-485
By JayPunchbuggy in forum Spindles & Drive MotorsReplies: 19Last Post: 15-05-2013, 08:00 PM -
huanyang vfd 2.2 error E.CO.A
By edgas10 in forum General ElectronicsReplies: 0Last Post: 01-07-2012, 08:12 PM



Reply With Quote


Bookmarks