Warco WM16 CNC Conversion.

[noyloj]

If I sold them I wouldn't be able to play with them, or re-use them for my router project! It's very simple. Granted they are not ideal but many people who convert these machines seem to do so in phases. Using what is cheap and at hand provisionally to go onto adapt the build into something else. Hoss's plans breaks down into three phases. Mine begins as an adaptation of the second phase. It's not an attack on anyone here to say that this is how I intend to build my machine. I'm very happy if you've all found good solutions. If I had the cash, or wanted to, I would buy a kit and go down that road but I simply came here to build a machine THIS way. The pitfalls, and I'm sure there will be many, are part of the learning curve for me. The log here should provide evidence of these pitfalls for other people. I honestly don't see what the problem is. I was not foul mouthed or abusive toward anyone here, believe it or not I respect you guys, who many would consider to be a bunch of geeks, because I am a sad geek too! I hope you can understand that my abrasive manner is not any reflection on anyone here, and I certainly didn't mean to be understood as rude! It's just who I am since my accident. Happy CNCing!