Warco WM16 CNC Conversion.

[noyloj]

It's me again! Your friendly neighbourhood upstart a&*$%£e! Well it seems that my drivers are copies of copies of Leadshine ES-D 808 drivers... Leadshine offer free tuning software on their website for this driver which is also listed as being appropriate for the 3Nm Nema24 frame ES-M22430, which I will probably replace my 8.5Nm x and y axis motors with... (possibly shifting one of the 8.5 up to the z position to replace the 12Nm) but that's gonna be after I've finished the preliminary build and can cut some metal...

Hopefully the tuning software will run on the copy drivers... fingers crossed!

[noyloj]

Well it's me again! More digging and I find that the drivers aren't JMC at all they are Changzhou Jinsanshi Mechatronics HSS86 (http://www.jss-motor.com/product/nem...nd-driver.html) they also seem to be a very close copy of the Leadshine ES-D 808 driver mentioned in the previous post. I have fired them an email to see if they also supply tuning software...

WARCO have crated up my WM16 for dispatch so hopefully should get it in a few days...

[noyloj]

Incidentally are there any Moderators out there who could move this Thread to the Mill Conversion part of this Forum, where it is probably more appropriate, or tell me if it's possible for me to do this!

[John S]

We don't have moderators, only dictators

[noyloj]

Well certainly parts of the last word!

Jo A -
hole...

[noyloj]

I meant tators of course like mashed tators! Y'know?

[noyloj]

Of course if no-one knows HOW to move this thread I'm sure there are forums that could explain to you how to do it... And what colour shirt you have to wear whilst moving the thread.. and what hot beverage to drink afterward... etc...