. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-01-2017 #11
    noyloj's Avatar
    Lives in Hereford, United Kingdom.
    noyloj
    Last Activity: 03-12-2023 Has been a member for 8-9 years. Has a total post count of 90. Received thanks 2 times, giving thanks to others 28 times.
    Ok

    UC300ETH motion controller arrived today... along with the bb2 (and some cables that don't quite work to connect the two. Damn it!)

    Couldn't get it to power up contacted cncdrive.com and they diagnosed that the jumper behind the 5V power socket was in the wrong position... I had noticed it didn't correspond with the drawing in the manual but was too scared to swap it over in case the magic pixies fried my new board...

    So the board powered up and eventually got recognized by my laptop.... that runs windows ten but doesn't have the dotNET 2.0 framework on it and wont allow me to install it... so on to Microsoft who have suggested downloading a later version of windows 10 and updating... PAINFULLY slow download that already dropped out once at 38%.

    I'll leave her cooking tonight and see how the cookie crumbles on the morrow...

    Gonna need to work out the electrics between the BOB and the drivers... PNP, NPN... who knows?

    Someone here probably... or it's out with the Oscilloscope Captain Clingon!
    Last edited by noyloj; 17-01-2017 at 10:26 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Warco WM16 Mill - Conversion to AC motor with VFD
    By birchy in forum Milling Machines, Builds & Conversions
    Replies: 16
    Last Post: 10-02-2022, 07:41 PM
  2. Warco WM16 Conversion
    By birchy in forum Milling Machines, Builds & Conversions
    Replies: 21
    Last Post: 25-03-2011, 09:32 PM
  3. Warco mini mill cnc conversion
    By buster in forum Milling Machines, Builds & Conversions
    Replies: 22
    Last Post: 20-03-2011, 07:48 PM
  4. CONVERSION: Warco VMC Turret Mill - CNC Conversion
    By antsals in forum Conversion Build Logs
    Replies: 33
    Last Post: 07-03-2011, 12:25 AM
  5. CONVERSION: Buget Warco Major 5 axis conversion
    By Tweaky in forum Conversion Build Logs
    Replies: 45
    Last Post: 07-10-2010, 04:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules