Cheap N Easy

[njhussey]

Well it certainly ain't pretty....but looks like it cuts and if it does what you want it to do then fair play to you

[CNCKitMan]

Well it certainly ain't pretty....but looks like it cuts and if it does what you want it to do then fair play to you

Thank you bro!

She so UGLY the bag i put over it up and ran away, leaving me a note stating it was cruel and unusual punishment.
I had to agree!

She's going to get upgraded slowly.
Then i'm going to refine a few parts, re cost and send a kit version to my friend in Scotland.

If that goes together and works out the box then i'll think about offering to others.
But they won't be ugly things like this is now.

Shes that ugly due to she costing £100

[JoeHarris]

Thank you bro!

She so UGLY the bag i put over it up and ran away, leaving me a note stating it was cruel and unusual punishment.
I had to agree!

She's going to get upgraded slowly.
Then i'm going to refine a few parts, re cost and send a kit version to my friend in Scotland.

If that goes together and works out the box then i'll think about offering to others.
But they won't be ugly things like this is now.

Shes that ugly due to she costing £100

Surely that spindle and mount alone cost more than £100? You've not convinced me to buy one just yet, but you have it moving which is more than I can say for mine which has not been cheap or easy!!


Sent from my iPhone using Tapatalk

[CNCKitMan]

Wassssson JR!

I'm not convincing anyone i don't work like that. You will or you won't is my level of sales, lol.

As for my cost
The Spindle is a POO! one that i have on it ATM. Came with a 80mm bracket. - £50
Controlling Motors (Arduino, Board, Stepper Drivers) £20
Ball Screws, bearings and nut £18
Steppers £30
2nd Hand Rails £2

So i'm sorry i under stated! by £20
£120 In total

wood, screws, bearing n bolts (free)

[CNCKitMan]

Nah bro, Spindle Mount and Controller £50

[Clive S]

Well nobody can say you are not a trier and hope that your kids are still excited with it

[CNCKitMan]

Well nobody can say you are not a trier and hope that your kids are still excited with it

True dat! all made from scrap wood, it's flat and cuts straight.
just waiting for my replacement spindle.
gotta change gantry then if i'm happy i'll make a non scrap version.

[CNCKitMan]

WASSON! OK so i've stalled HARd! on the re-build of my sheet cutter CNC with aluminium frame.
Whilst we are waiting for that i built 2 small 450mm x 450mm cutting area machines using belt drives.
One's at my mates being abused so no pics there but here's the other one (waiting on the post for parts)

photos to follow

[CNCKitMan]

This still has to have the Z-Axis on it but parts not here yet.

[ravihotwok]

starting to look really good mate