Threaded View
-
09-01-2017 #21
Last Activity: 23-09-2017
Warco WM14 you can usually get away without having to machine the underside of the table.
Warco WM16 is borderline some clear, some don't.
Warco WM18 you always have to machine the table.
The problem comes about from droop when casting as they are cast top up.
The longer the table, the slower it cools and gives rise to the middle dropping down under the weight of the metal.
There are ways when casting to prevent this but seeing as it's not their remit to make sure they can convert to CNC then they don't bother.
There is enough standard clearance for the manual ACME screws.John S -
-
The Following User Says Thank You to John S For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Waterproof CNC Router Cutting bed
By mondrota in forum Machine DiscussionReplies: 37Last Post: 03-06-2019, 10:12 AM -
CNC Router V1.0 (For Cutting Multiple Materials)
By biketrialsdave in forum Gantry/Router Machines & BuildingReplies: 272Last Post: 05-08-2017, 03:37 PM -
Cutting metal shapes
By jmac80 in forum Metalwork DiscussionReplies: 31Last Post: 27-11-2013, 10:32 PM -
aluminium profile for cutting bed of router
By steeplejack in forum Marketplace DiscussionReplies: 3Last Post: 19-10-2013, 10:52 PM -
WANTED: CNC Mill/Router for Cutting Aluminium
By kylelnsn in forum Items WantedReplies: 5Last Post: 09-08-2012, 09:54 PM
Bookmarks