Hi Edward

I bought motors and drives a while ago.. a friend in France had partially completed steel router project that he lost interest in. I have 2HSS86 hybrid drives with 12Nm and 8Nm motors.... I know it's overspec for the mill but I want to do my own router later with these drives and motors so I will play with them on this mill and probably swap out for smaller when I get some money together.... I'm pretty sure I can use 3.0Nm Nema24 HSE60 motors with these drivers which should be ideal for x and y and will probably stick with Nema34 but at 4.5Nm for the z. This means I can keep all the control electronics/PSUs the same for both machines and hopefully just plug and play them.

Jo