Hybrid View
-
08-04-2020 #1
If it has ATC a pause can be introduced before tool change, spindle stop, brush attachment removed by hand, tool change, attachment on, spindle on and follow.
But in real life the people that have tool change and use the shoe, remove the stripes or change to shorter attachment so tool change can be done. You know, some dust on table but not in the air, which is more important
I have had queries but at the end that's how we proceed, as above. Main problem on what you are saying is that most of the Z axis on most of the machines are not clean and well thought like mine or yours so there is always some obstruction that impedes that.
-
08-04-2020 #2
That's defeats the whole point of ATC. The very reason for ATC is so it can be left unattended to get on with the job, if you have to baby sit the vacuum it's a waste of time having the ATC. Nobody who fits an ATC and wants to use it to it's full potential would accept your suggestion.
Those who have a need and can afford an ATC spindle will most probably have a clean Z-axis setup or at least the abilty to modifiy the Z-axis. A retractable or movable dust shoe is a MUST for an ATC to function correctly if it uses a typical Fork or carosel type slide in tool rack.
Edit: It wouldn't be a massive change to stick some wings on it, open up the spindle hole a little and use the setup as I made here. The customer would just need to make brackets for the pneumatic actuators which can fasten either to the front plate or like I did here on the spindle mount itself so comes off as a unit with spindle mount.
Last edited by JAZZCNC; 08-04-2020 at 12:10 PM.
-
08-04-2020 #3
-
08-04-2020 #4
-
The Following User Says Thank You to JAZZCNC For This Useful Post:
-
09-04-2020 #5
-
09-04-2020 #6
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Diy dust shoe dust strip bristles
By charlieuk in forum Dust Extraction & CollectionReplies: 17Last Post: 18-06-2019, 10:47 AM -
Dust shoe
By shedman in forum Machine DiscussionReplies: 0Last Post: 01-01-2016, 09:25 PM -
Dust shoe bristles
By charlieuk in forum Gantry/Router Machines & BuildingReplies: 18Last Post: 06-11-2014, 03:45 PM -
Dust Shoe Deisgn
By m.marino in forum Open Source Designs & PlansReplies: 0Last Post: 01-08-2013, 12:19 PM -
What size water hose for 2kw spindle?
By motoxy in forum Generic Chinese SpindlesReplies: 5Last Post: 05-08-2012, 05:30 PM
Bookmarks