mach3 csmio ips errors

[magicniner]

The manual doesn't specify a Mach3 version, just "latest here - " and there's a good chance the knob that bought Mach3 had his numpties break some things whilst breaking others in the versions after Art left.
Check which version of Mach3 the CSlabs csmio ips plugin works best with,

- Nick

[JAZZCNC]

The manual doesn't specify a Mach3 version, just "latest here - " and there's a good chance the knob that bought Mach3 had his numpties break some things whilst breaking others in the versions after Art left.
Check which version of Mach3 the CSlabs csmio ips plugin works best with,

- Nick

No I'm fitting these all the time and it works fine with latest Mach3. There is version that is recommended by Cslabs if having problems but I've found latest one works fine with most setups and thats both with IP-M and IP-S. However I have seen some people have issues and it's the PC that's at fault things like .Net broken etc. Might be worth updating the Microsoft .Net
If using some screen sets like Gerry's 2010 then Older version needs to be used because of how it works with probes etc and Art soft Knob screwing things up.

[Web Goblin]

I'm using 3.043.066. The pc isn't connected to the internet but I will have a go at updating .net and see if it helps. At least now I can change stuff in the plugin and save it now so it wont stop the machine from working I hope.
I have emailed cslab tech help with the photos so I will update this thread with that info when they reply.
I now need to sort out a tool height setter and get it functioning.