. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 07-01-2017 #7
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by magicniner View Post
    The manual doesn't specify a Mach3 version, just "latest here - " and there's a good chance the knob that bought Mach3 had his numpties break some things whilst breaking others in the versions after Art left.
    Check which version of Mach3 the CSlabs csmio ips plugin works best with,

    - Nick
    No I'm fitting these all the time and it works fine with latest Mach3. There is version that is recommended by Cslabs if having problems but I've found latest one works fine with most setups and thats both with IP-M and IP-S. However I have seen some people have issues and it's the PC that's at fault things like .Net broken etc. Might be worth updating the Microsoft .Net
    If using some screen sets like Gerry's 2010 then Older version needs to be used because of how it works with probes etc and Art soft Knob screwing things up.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to JAZZCNC For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CSMIO-IP/S Driving Relays directly
    By cropwell in forum CS-Lab (CSMIO)
    Replies: 10
    Last Post: 02-01-2017, 01:40 AM
  2. Axis scaling errors - is this just to be expected with C7 screws?
    By GND in forum Gantry/Router Machines & Building
    Replies: 22
    Last Post: 23-11-2016, 11:19 PM
  3. Mach3 oem buttons with CSMIO-IP/S
    By Web Goblin in forum Artsoft Mach (3 & 4)
    Replies: 2
    Last Post: 07-11-2016, 07:14 AM
  4. Motorcalc spreadsheet errors
    By jimbo_cnc in forum General Discussion
    Replies: 7
    Last Post: 10-03-2015, 07:02 PM
  5. ES-D1008 + CSMIO/IP-S wiring
    By Matt81 in forum CS-Lab (CSMIO)
    Replies: 3
    Last Post: 03-05-2014, 10:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules