Threaded View
-
31-07-2009 #1
Due to other commitments (wife, children, vintage scooters etc) I have for sale the following items:-
- A Complete Isel-automation Flat bed X-Y table with motors and mounting plate on gantry for a Z-axis device. There are also the cables to link it to the SM400 very little use. Similar to the bottom right unit on this page http://www.isel-germany.de/products/product.php?lang=en&ID=p89
http://www.iselcncmachines.co.uk/products/isel_prod/cat_cnc_mach.shtml
- An SM motion control SM 400 GT continuous path controlled which was supplied to go with the above (can be seen on the SS motion control site http://sm-elektronik.de/steuerungen/e_sm400.html) along with a memory card and keys.
- An old late 90's Galaad dongle (software on a CD original was lost before I got it, have some on disc that seems to work with it) http://www.galaad.net/home-eng.html
- A number of single board PC’s, Arcom SBC104 with ¼ VGA displays and touch screens. I have data sheets and ARCOM utility disc software.
· CPU: 80368SX 25MHz with PC/AT architecture.
· Expansion: PC/104 expansion bus, 8/16-bit. Single master only.
· BIOS: Chips and Technologies SCAT/SX BIOS (Basic Input-Output System) in 128KB flash EPROM
· System memory: 2MB of Fast page DRAM.
Optional 128KB of battery backed SRAM.
· Silicon Disk:
1MB of Intel SmartFlash, or 4MB of Intel StrataFlash.
Includes Datalight Flash Filing system FlashFXTM.
Includes Datalight ROM-DOSTM
Support for M-SYSTEMS Disk-On-Chip silicon drives.
· Integrated I/O:
Battery backed Real Time Clock.
AT keyboard interface via a 6-way mini DIN socket.
IDE interface, supporting up to two IDE devices.
FDD interface, supporting two Floppy Disk Drives up to 1.44MB.
LPT parallel port, supporting SPP, and bi-directional EPP modes.
Two 16C450 UART compatible RS232 serial ports (COM1 & COM2), up to 115200 Baud.
Link selectable full-duplex RS-422 or half-duplex RS-485 available on COM2.
Watchdog timer generating an NMI or optional RESET. Link selectable 3 second or 8 second time-out.
Most software and technical details can be found in the internet. Some data sheets I have available.
I thought that I would open them to sensible offers from users of this site first rather than put them on Ebay first then telling you they were on. Can send some pics (when I take them)
Collection only (Cambridge) for the Isel & SM400.
Contact Steve at [email protected]
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Mounting motor under table?
By Rogue in forum Linear & Rotary MotionReplies: 51Last Post: 16-04-2012, 04:02 PM -
FOR SALE: ISEL Automation router GFM 4433
By Nic in forum Items For SaleReplies: 3Last Post: 19-12-2011, 06:07 PM -
RFQ: Mounting Plate
By ferus in forum Projects, Jobs & RequestsReplies: 9Last Post: 26-10-2011, 02:56 AM -
Zapp Automation Discount Weekend !
By Gary in forum Manufacturer NewsReplies: 6Last Post: 21-08-2011, 11:29 PM -
Mounting a chuck on a Rotary table
By irving2008 in forum Machine DiscussionReplies: 17Last Post: 02-09-2010, 07:23 PM
Bookmarks