Isel-automation Flat bed X-Y table with motors and mounting plate

[ptjw7uk]

Has the isel got a model number and some idea of table size would be nice
Peter

[Vespa Mad]

Hi Peter
The label has (as best as I can make out)
Art-Nr 296101 9999
Art Nr-Spindel - Mutter - Motor
X 2111392063/2-13001
Y 2111392063/2-13001
It is large, the base is about 1m x 800mm, I will check the throw and get back to you with the X & Y travels.

Steve

[Vespa Mad]

I have measured the travel and it is 300mm x 320mm, will try to get some pictures ready if anyone is interested.

Steve

[John S]

Sounds like the same machine I have.

.

[John S]

This little baby earns some serious coin, no way that's going.

.

[sm400]

Hi,
my name is josef, im new here can anybody help me, i have the same realy rare cnc controller like the beginner of this thread, its the modell sm400/gt4.
the controller has a little error, the reference job will not work at the beginning, alsow axis who should not be in motion, crashes onto the endstoppers (have on the dip-switches into the controller turned on only the x-axsis, but the Z-axis alsow drives sometimes fully and without controll!
should i fix this troubles , i need alsow a update from V9.0 to V17.?
should anyone have a newer firmware as V17.3 and do not need the older eproms, i will buy from him,
thanks for any tipps, and sorry for my bad english!