. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 23-01-2017 #13
    Jonathan's Avatar
    Lives in Leicester (Home) or Nottingham University (2nd Home), United Kingdom.
    Jonathan
    Last Activity: 05-04-2020 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 3,571. Received thanks 325 times, giving thanks to others 8 times. Referred 1 members to the community.
    That's better. Next check that the turn on/turn off delay times in the datasheet are no greater than those of the original. Same for the total gate charge (Qg). This is for compatibility with the programmed dead time and gate drive. If those specifications are met you can be reasonably confident that it's suitable. You could go into more detail (e.g. compare the Vds vs Ids), but it's not really worth it for a cheap product and you would need to identify more components in the circuit to be sure.

    Edit: Also, in order of preference for brands I would go with for IGBTs are Infineon, IR, ST / ON Semi & others. But this is pretty subjective.

    [P.S. I'm trying to demonstrate how to choose - not just give you a link. For reference, I've found some in England for around 3 CHF.]
    Last edited by Jonathan; 23-01-2017 at 08:34 PM.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Weird problem - stepped/staged deceleration on Huanyang 2.2kw Spindle
    By glynster in forum Spindles & Drive Motors
    Replies: 0
    Last Post: 25-01-2016, 01:39 PM
  2. Problem with Spindle not spinning
    By Noplace in forum Spindles & Drive Motors
    Replies: 4
    Last Post: 22-01-2016, 02:40 PM
  3. CONVERSION: Emco F1-p Mill Mach3 convention, Spindle motor problem
    By andre13442 in forum Conversion Build Logs
    Replies: 7
    Last Post: 14-01-2016, 12:14 PM
  4. Huanyang hy02d223b frequence convertor problem
    By frans cop in forum Motor Drivers & Controllers
    Replies: 3
    Last Post: 14-07-2015, 10:33 AM
  5. CNC spindle control VFD problem
    By djc in forum Motor Drivers & Controllers
    Replies: 1
    Last Post: 13-09-2009, 09:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules