New Memeber and very new to CNC

[jamhot]

Brill - thanks Clive. I'll have a good read.

[JAZZCNC]

To save your bed and table like metioned always cut air but if you want to see the actual cut then buy some thick insulation Foam and cut that first. This way gives enough time to react without damaging tool if goes wrong.

[jamhot]

To save your bed and table like metioned always cut air but if you want to see the actual cut then buy some thick insulation Foam and cut that first. This way gives enough time to react without damaging tool if goes wrong.

Yeah good thinking - I thnk I need to get some blocks of wood or smilair material to test on (and use as a safty bed)! Thanks.

[JAZZCNC]

Yeah good thinking - I thnk I need to get some blocks of wood or smilair material to test on (and use as a safty bed)! Thanks.

wood will stick break tools soft but firm material is what you want.

[jamhot]

wood will stick break tools soft but firm material is what you want.

What material do you use, or would recommend? Thanks.

[Clive S]

What material do you use, or would recommend? Thanks.

Re read post #9

[jamhot]

Oops silly me, thanks I'll grab some of that - Cheers.