My Build - I blame you lot for this....!

[AdCNC]

Hi Steve, i was looking at your build and must say A1 on the machining front as regards to the aluminum! how did you cut the two sides out of what looks to me like 3/4" or 20mm aluminum plate?

[John S]

Steve's on holiday for a fortnight so can't answer but being a true mate and to stop the bastard lying thru his teeth I can tell you he didn't cut them, I did.

At the time Steve didn't have a working machine, a bit of chicken and egg situation, no sides, no machine but need to machine sides etc.
Steve did the drawings and supplied the material.

I ignored his drawings and did it how I wanted Musta been a fluke but it worked out OK.

.